Hey guys, I just built a new rack for my snakes. How long of a piece of flexwatt can be used off of one power cord? Do I need individual piece for each level or can I weave it in and out of each level? Thank is advance
Announcement
Collapse
No announcement yet.
Flexwatt
Collapse
X
-
Re: Flexwatt
You can daisy chain them together weave it through the rack.
-
Re: Flexwatt
You're limited to the total wattage that's plugged into each power source. For instance, if you're using a Herpstat 4 and 11 inch flexwatt: the tstat is rated at 400W/channel, the heat tape draws 20W/linear foot. So you can (theoretically) have 20 feet of 11" fw per channel. Weaving them through a rack can be a good way to go, a lot of commercial racks come set up like that. Hope this helps.
Comment
Comment